Against Overheat Accelerated Aging Test Chamber For Aging Testing
The Accelerated Aging Test Chamber is suitable for the whole
machine device, parts, materials for high temperature accelerated aging test, through the test of the
equipment can be checked or evaluated product defects, to quickly find out the problem, provide effective
means to solve the problem, fully improve production efficiency and product quality.
This Accelerated Aging Test Chamber can only be used for the test
of non-heat dissipation test samples. It is not recommended to test the heat dissipation test samples, because the
temperature control of the test chamber is based on the ambient temperature and dynamic temperature
compensation, the heat dissipation load will affect the temperature compensation amount,
so the high temperature control
ability cannot be guaranteed!
Products Features:
•PID algorithm automatically controls chamber's temperature.
• Multiple independent sensors units providing multiple protections
during tests.
• Special chamber-body structure design for high-temperature
environment with heat insulation.
• Fashionable design of modular construction.
• Optional APP mobility management.
• Special air circulation system inside ensures testing accuracy.
Standard:
1, GB/T 2423.2 high temperature test method
2, GJB 150.3 high temperature test method
3, IEC 60068-2 temperature test method
Specifications:
| Accelerated Aging Test Chamber | EWG3010 |
| Test Space Volume(L) | 600 |
| Temp.Range(℃) | R.T+20~300 |
| Temp.Constancy(℃) | ±0.1~±0.8 |
| Temp.Homogeneity(℃) | ±0.5~±2.0(RT+20℃~+200℃),±1.5~±3.5(200℃~+300℃) |
| Temp.Deviation(℃) | ±0.5~±2.0(RT+20℃~+200℃),±0.5~±2.0(200℃~+300℃) |
| Heat Up Time (min) | 50(RT→+200℃),90(RT→+300℃) |
| Test Space Dimension(mm) | 1000W×1000D×1000H |
| External Dimension(mm) | 1690W×1280D×1850H |
| Power | AC380V±10%,50HZ,3/N/PE |
Installation Space:
Work station ground should be flat, good ventilation; no flammable
article, corrosive gas or dust;
No strong electromagnetic radiation source nearby;
Close to drainage system ( within 2 meters to refrigeration unit,
for condensate water)
The ground bearing capacity not less than 8000kg/m2；
Prepare proper power supply and water supply;
If need water or gas supply, should be equipped with in advance;
Ambient Temp: 5℃~25℃suggested, 25℃~35℃ function well;
Ambient Humid:≤85%RH；
Ambient Pressure:86KPa～106KPa;
Structure:
Integral, the front of the Accelerated Aging Test Chamber is the
studio door, the back and top of the electric
control cabinet and electric control device, the main control
interface is located in the front of the test chamber.
The door is open in the width direction.
The studio is equipped with circulating air duct system and air
conditioning system: centrifugal fan blade,
air guide device, heater, temperature sensing device
